- Ethernet over 8 x E1
- Provides connection of remote LAN networks with Ethernet 10/100 BaseTX or 100 BaseFX interface via telecommunication network with G.703, 2 Mbit/s interface
- Easy configuration
- Integrated control and monitoring, SUNCE-M (by control unit OLC)
Applications
- Connection of small capacity IP DSLAM to IP Switch
- Connection of remote LAN networks with Ethernet interface
- Connection of small capacity IP DSLAM to IP Switch
- IP DSLAM and IP Base station backup/backhaul
- Remote corporative networks LAN connection
Basic functions
- Enables connection of remote Ethernet networks with 8 x E1 links
- Broadband service based on Ethernet technology for existing TDM PDH and SDH network
- For TDM transmission maximum capacity of non framing E1 signal is used
- Interface Convertor realize Ethernet Bridge function with 8 x 2048 kbit/s maximum WAN interface capacity
- At Ethernet side there are two ports: electrical 10/100 BaseTX interface and optical 100 BaseFX interface
- Electrical Ethernet interfaces are half/full duplex with auto negotiation procedure which define the type of interface 10 or 100 Mbit/s
- Interface Convertors are transparent for all higher order protocol (TCP-IP, XNS, ISO,...)
- VLAN can be configured for any port independently
- Support for QoS priority choice according to the port or IEE802.1p
- Loop test and signal generation possibility
- Integrated control and monitoring using OLC or FMV unit
- Card option ready to be used in standard ETSI or 19" shelves
- Stand alone, rack or desktop mounting options
Data sheets (pdf): KGET8 (Serbian), KGET8 (English)
